The Staplex Company

Location

• Address:

The Staplex Company 777 Fifth Avenue Brooklyn, New York 11232-1626 USA

Contact details

• Phone (USA toll-free): 1-800-221-0822
• Phone (NYC and outside USA): 1-718-768-3333
• Fax: 1-718-965-0750
• Email: info@staplex.com

Customers with comments, inquiries, suggestions, or special requirements are encouraged to contact Staplex using the details above.

777 Fifth Avenue Brooklyn, New York 11232-1626 USA

• Staplex is located on Fifth Avenue in Brooklyn, between 28th Street and 29th Street.

Green-wood Cemetery is across the street on Fifth Avenue.

Public transit directions (subway)

• Take the BMT "R" train to 25th Street Station in Brooklyn.
• Walk east 2 blocks to Fifth Avenue.
• Walk south 3 blocks along Fifth Avenue to 28th Street.
• The Staplex entrance is on Fifth Avenue between 28th and 29th Streets.

Driving directions (summary)

From Manhattan

• Take the Brooklyn Battery Tunnel and exit at Hamilton Avenue (far right immediately after the toll plaza).
• Continue on Hamilton Avenue as it becomes Third Avenue.
• Continue about 12 blocks to 29th Street.
• Turn left on 29th Street and go two blocks to Fifth Avenue.

Staplex entrance is between 28th and 29th Streets on Fifth Avenue.

From Long Island

• Take the Long Island Expressway (LIE) westbound to the 48th Street exit.
• Continue on the Brooklyn Queens Expressway (BQE) south to the Hamilton Avenue exit.
• Stay on Hamilton Avenue as it becomes Third Avenue and continue about 12 blocks to 29th Street.
• Turn left on 29th Street and go two blocks to Fifth Avenue.

Staplex entrance is between 28th and 29th Streets on Fifth Avenue.

From JFK Airport area

• Take the Belt Parkway westbound to Route 278 (Gowanus Expressway).
• Take the 38th Street exit.
• At the bottom of the ramp, proceed straight one block to Fifth Avenue.
• Turn left on Fifth Avenue and continue nine blocks to 29th Street.

Staplex entrance is between 28th and 29th Streets on Fifth Avenue.

From New Jersey via the Verrazano-Narrows Bridge

• Take Route 278 (Gowanus Expressway) to the 38th Street exit.
• At the bottom of the ramp, proceed straight one block to Fifth Avenue.
• Turn left on Fifth Avenue and continue nine blocks to 29th Street.

Staplex entrance is between 28th and 29th Streets on Fifth Avenue.

From the Bronx and Upstate New York

• Take the Triboro Bridge to the Brooklyn Queens Expressway (Route 278) south.
• Exit at Hamilton Avenue.
• Continue on Hamilton Avenue as it becomes Third Avenue and go about 12 blocks to 29th Street.
• Turn left on 29th Street and go two blocks to Fifth Avenue.

Staplex entrance is between 28th and 29th Streets on Fifth Avenue.

For the most current traffic conditions or transit changes, visitors should check local transit or mapping services.

Lists Staphorst as a location. Areas beyond these are not published.

Main product groups (selection guide summary)

Staplex offers a complete line of air sampler pumps and accessories for airborne particulates, including:

• High Volume Air Samplers (TFIA series)

High volume samplers for particulate collection, available in several voltage and configuration options (including models with built-in flow adjuster and countdown timer, as well as DC-powered versions and battery pack options).

• Filter media for high volume samplers

A range of filter papers and glass fiber or quartz filters in different sizes (for example, 4" diameter, 6"×9", 8"×10") and slotted media for cascade impactors.

• Filter holders and hardware

Filter holder assemblies in common formats (such as 4" diameter, 6"×9", and 8"×10"), plus related mounting hardware.

• Tripods and outdoor shelters

Tripod mounting systems and outdoor aluminum shelters for field installations.

• Calibration equipment

Calibration kits and accessories for high volume samplers, including:

• Calibration kits for different filter holder sizes
• Primary electronic air flow calibrators
• Rotameters and bubble flowmeter calibrators

• Flow controllers and recorders

Constant flow controllers and flow recorders for high volume air sampling setups.

• Carrying and storage cases

Cases designed for transporting and storing high volume air samplers and accessories.

• Impactors and size selective inlets

Annular kinetic impactors, cascade impactors, PM10 size selective inlets, and PM2.5 conversion kits for size selective particulate sampling.

• Environmental air sampling systems (TSP and PM10)

Systems for total suspended particulates (TSP) and PM10 sampling, including options with critical flow control and brushless configurations.

• Specialized systems
• High volume pesticide air sampling systems
• Radioiodine air sampling systems with matching cartridges

• Low volume and area/asbestos/microbial air samplers

Low volume air samplers (including battery powered models), econometric samplers, volumetric samplers, and microbial air samplers for asbestos, lead, nuisance dusts, and microbes.

• Personal air samplers

Battery and AC powered personal air samplers covering a range of flow rates, including constant flow models and detector tube air samplers.

• Calibration tools for low volume and personal samplers

Additional primary flow calibrators, rotameters, and bubble flowmeters.

• Membrane filters and preloaded cassettes

Membrane filters and preloaded filter cassettes (for example, 25 mm and 37 mm) for personal and area samplers.

• Special analysis kits

Acetone vaporizer and analysis kits for certain sampling and analysis methods.

For specific model numbers, technical specifications, and regulatory applications, customers should consult Staplex technical documentation or contact Staplex directly.

Staples and fastening supplies

Staplex supplies a range of staples matched to its stapling equipment, including:

• Staplex High Speed Staples for electric staplers
• Heavy capacity staples for high capacity manual staplers
• Equal Staples, including:
• Stainless steel staples
• Aluminum staples

These staples are designed to provide consistent performance and are suitable for demanding office, packaging, and production environments.

Manual staplers

• Staplex manufactures heavy capacity manual staplers for situations where manual operation is preferred or required.
• These manual staplers are intended for high volume or heavy duty stapling in business, reprographics, and packaging workflows.

For detailed model specifications and selection help, customers should refer to Staplex product literature or contact Staplex directly.

AccuSlitter electric mail openers

• In the 1980s, Staplex developed its AccuSlitter electric mail openers.
• Key features associated with Staplex mail opening technology include:
• A patented "chadless" electric mail opening design that opens envelopes without removing the top of the envelope.
• Belt-less feed on certain automatic mail opener models, an engineering improvement introduced in the 1990s.

These design features are intended to improve reliability, reduce mess, and protect contents while processing large quantities of envelopes.

For detailed model information, capacities, and specifications, customers should refer to Staplex product literature or contact Staplex directly.

• Applies self-adhesive perforated wafer seals to close self-mailers and flat packs.
• Provides tamper-evident sealing for suitable packaging formats.
• Designed to help users comply with U.S. Postal Service regulations for tabbing self-mailers and related items.

For current models, technical specifications, and recommended uses, customers should consult Staplex product literature or contact Staplex directly.

Ask anyway — the agent will say plainly that it is not published rather than guess.