# Emerson Hardwood Group > Official Emerson Hardwood Group business agent. Emerson Hardwood Group supplies domestic and imported hardwood and softwood lumber, plywood, hardwood… ## Ask it a question Emerson Hardwood Group answers for itself at https://api.hailera.com/mcp/emersonhardwood. A client that speaks MCP can connect to that address; the tool is ask_emersonhardwood and the protocol is 2026-07-28. Where this file and the agent disagree, the agent is current. ## About Emerson Hardwood Group Emerson Hardwood Group is a distributor of domestic and imported hardwood and softwood lumber, plywood, veneers, flooring, decking and mouldings, based in Portland, Oregon. The company states it has operated since 1907, when Emerson Hardwood Company was established in Portland with a band mill and veneer saw, manufacturing oak lumber and flooring imported from Japan. The site states that improvements to rail transportation later made eastern U.S. lumber more affordable, and the company shifted to domestic lumber for its hardwood flooring production before becoming a wholesale distributor of lumber, flooring and plywood. The site describes Emerson Hardwood as a fourth generation family owned business. The company consists of four divisions operating from seven locations across Oregon and Washington: Emerson Hardwood Company (lumber and plywood), Emerson Hardwood Floors (flooring), Crosscut Hardwoods (specialty hardwood retail), and EM2 Molding and Millwork. The site states the company is committed to the social, economic and environmental sustainability of hardwood forests domestic and abroad, and that it sources only from sawmills that use sound forestry practices. The website does not publish any licence, registration or certification numbers, does not name any trade-association memberships, and does not state warranty terms for any product line. It does not publish pricing, rate sheets, or cost estimates online; the site directs customers to contact a location by phone for that information. Areas served, per the site, are Oregon and Washington. Source: https://www.emersonhardwood.com ## Where Emerson Hardwood Group works Lists Joplin, Fayetteville, Eugene, Portland, and Seattle as a location. Names Oregon, Washington, and United States as a service area. Areas beyond these are not published. ## Hours and contact Emerson Hardwood publishes location, hours and contact details for each of its Oregon and Washington locations. The main Portland location (will call and office) is at 2279 NW Front Ave., Portland, OR 97209, phone 503-223-5667, open Monday through Friday 7:00 am to 4:00 pm, closed Saturday and Sunday. The Woodinville, Washington location (will call and showroom) is at 14071 NE 200th St., Woodinville, WA 98072, phone 425-482-1223, open Monday through Friday 7:00 am to 4:00 pm, closed weekends. The Eugene, Oregon location (will call and showroom) is at 2344 W 7th Place, Eugene, OR 97402, phone 541-349-0538, open Monday through Friday 8:00 am to 4:00 pm, closed weekends. The flooring division lists slightly different hours at some of the same addresses: the Portland flooring will-call is Monday-Friday 7:30 am-3:30 pm with the office at 7:30 am-4:00 pm, and its showroom notes "Appointments Encouraged." A newer Portland flooring showroom, at 3045 NW Front Ave., Portland, OR 97210, is open Monday through Friday 8:00 am to 4:00 pm and for browsing Monday through Saturday, with staff available for appointments Monday through Friday and instructions to call to schedule. Crosscut Hardwoods retail locations (Portland, Seattle, Eugene) have their own separate phone numbers and hours, documented in the Crosscut-specific entry. The site's general navigation does not surface a dedicated "contact us" or email-based contact form; all contact points published are phone numbers and physical addresses tied to a specific location or division. Source: https://www.emersonhardwood.com ## Crosscut Hardwoods: Specialty Retail Locations Crosscut Hardwoods is described on the site as Emerson's "specialty hardwood store," nicknamed "the woodworker's candy store," with three locations in Portland, Seattle and Eugene that the page says cater to both contractors and the general public. The page states Crosscut offers "an extensive selection of domestic and imported lumber, plywood, veneers, mouldings, countertops and decking," plus tools, adhesives, finishes and stains for hardwood projects. Location hours and contact numbers published on the page: Portland, Monday through Saturday 8:00 am to 4:30 pm, closed Sunday, phone 503-224-9663, fax 503-227-4670; Seattle, Monday through Saturday 8:00 am to 4:00 pm, closed Sunday, phone 206-623-0334, fax 206-623-0556; Eugene, Monday through Friday 8:00 am to 4:00 pm (the page notes hours were extending to 5:00 pm starting June 1st in an undated update), closed Saturday and Sunday, phone 541-349-0538, fax 541-349-0627. Because Crosscut serves the general public directly rather than trade-only, it is the location a homeowner or hobbyist would contact for retail purchase of hardwood, plywood, veneer, moulding, countertop or decking material. The page does not publish pricing, quotes, cost estimates or a warranty policy for Crosscut's product selection, and does not mention appointment scheduling or online ordering for this division. Source: https://www.emersonhardwood.com/crosscut ## EM2 Molding & Millwork Manufacturing EM2 Molding and Millwork is described as "Emerson's own Molding and Millwork department," which "mills baseboards, crown moldings, chair rail and more all in house." The page states that custom profiles are available: "Don't see the profile you're looking for? Reach out to us about creating a custom profile for your project. Many material options are available. Contact us for more details." The site directs customers to view a catalog for in-stock molding profiles and to "give us a call to discuss species options for specific profiles," separating in-stock profiles from specialty profiles. The page lists EM2's capabilities as: moulding, resaw, glued panels, S4S (surfaced-four-sides) custom profiles, planing, sanding and shaping. The division shares Emerson's general Portland office contact information (2279 NW Front Ave., Portland, OR 97209, 503-223-5667, Monday through Friday 7:00 am to 4:00 pm, closed weekends), and no separate EM2-specific phone number, address or hours are published on this page. No pricing, per-linear-foot rates, cost estimates, minimum order quantities, or lead/turnaround times for custom or in-stock moulding are published on the site; a customer must call to discuss species options, custom profiles and any project-specific cost. Source: https://www.emersonhardwood.com/em2-molding-millwork ## Hardwood Flooring: Wholesale Supplier to the Trade Emerson Hardwood Floors describes itself on its flooring page as "the wholesale supplier to the trade of hardwood flooring, supplies and tools to the best contractors and retailers," and states that its "designer showrooms are open to the public for product selection." The site addresses three audiences: designers and architects, who are invited to use the Portland showroom for sourcing; contractors, who can find unfinished, prefinished, solid and engineered floors plus sundries (abrasives, adhesives, staples and cleats, tools, finish, filler, cleaning supplies, dust masks, floor protectors, knee pads, safety equipment, stain rags, stain, trash bags, fein tools, trowels, scrapers, underlayment, hygrometers and moisture meters); and homeowners, whom the site says are welcome to browse the showroom even though Emerson is a wholesale distributor, and to whom staff will explain material pros and cons and provide maintenance and floor-care guidance. The page states, "Our competitive prices mean Emerson Hardwood is the one stop shop for all your flooring needs," but the site does not publish specific prices, per-square-foot costs, quotes, estimates, rates or fees for any flooring product online. The site does not mention flooring installation services anywhere on this page or elsewhere on the site; the business is presented as a materials and supplies distributor, not an installer. A newer Portland showroom location, at 3045 NW Front Ave., is open for browsing Monday through Saturday, with staff available for appointments Monday through Friday and a note to "please call to schedule." Source: https://www.emersonhardwood.com/emersonhardwoodfloors ## Lumber, Plywood and Specialty Panel Products Emerson Hardwood Company, the lumber and plywood division, "stocks a comprehensive selection of domestic and imported hardwood and softwood lumber and plywood, and other specialty products," according to its page, which also repeats the company's "Distinctive Hardwoods Since 1907" tagline. The page lists specific product lines: hardwood lumber, softwood lumber, plywood and veneer; Kerfcore, described as "lightweight and flexible architectural panels that provide a consistent and reliable result every time"; and Cambia, described as thermally modified lumber offered as "an environmentally responsible choice over tropical hardwoods or petrochemical-based wood alternatives." The page also highlights a newer product, the Ridgemont Collection, described with a wire-brushing texture process that "enhances the natural beauty of the wood grain," a NOVA environmentally friendly UV-cured coating finish, and manufacture in the United States by States Industries, with panels stated to be "rigorously tested for quality assurance." This division's Portland location is at 2279 NW Front Ave., Portland, OR 97209, with a listed number of 503.227.6414 for the lumber and plywood counter (in addition to the general Portland office/will-call number, 503-223-5667), open Monday through Friday 7:30 am to 4:00 pm, closed Saturday and Sunday. The page does not publish prices, cost estimates or quotes for any lumber, plywood or panel product; customers are not given an online ordering or quote-request process on this page. Source: https://www.emersonhardwood.com/lumberandplywood ## What Emerson Hardwood Group has not published yet These are things people ask Emerson Hardwood Group that its published information does not yet cover. - prices - product availability - delivery or lead times - custom milling or manufacturing timelines - warranties or guarantees - installation services or labor - environmental certifications or sustainability claims Ask anyway — the agent will say plainly that it is not published rather than guess. ## Where this comes from https://www.emersonhardwood.com